Tires
TIRE SAFETY INFORMATION..
Tire safety information will cover aspects of the following information: Tire Markings, Tire..
Identification Numbers, Tire Terminology and..
Definitions, Tire Pressures, and Tire Loading.
Tire Markings..
Tire Markings..
1 — US DOT Safety Standards Code..
(TIN)..
2 — Size Designation..
3 — Service Description..
4 — Maximum Load..
5 — Maximum Pressure..
6 — Treadwear, Traction and..
Temperature Grades..
NOTE:..
● P (Passenger) — Metric tire sizing is based on US design standards. P-Metric tires have the letter..
“P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H.
● European — Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter..
P is absent from this tire size designation.
Example: 215/65R15 96H.
● LT (Light Truck) — Metric tire sizing is based on..
US design standards. The size designation for..
LT-Metric tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preceding the size designation.
Example: LT235/85R16.
● Temporary spare tires are designed for temporary emergency use only. Temporary high pressure compact spare tires have the letter “T” or..
“S” molded into the sidewall preceding the size designation. Example: T145/80D18 103M.
● High flotation tire sizing is based on US design standards and it begins with the tire diameter molded into the sidewall. Example: 31×10.5..
R15 LT.
TIRE SIZING CHART..
EXAMPLE:..
Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31×10.5 R15 LT..
P = Passenger car tire size based on US design standards, or..
….blank…. = Passenger car tire based on European design standards, or..
LT = Light truck tire based on US design standards, or..
T or S = Temporary spare tire or..
31 = Overall diameter in inches (in)..
215, 235, 145 = Section width in millimeters (mm)..
65, 85, 80 = Aspect ratio in percent (%)..
● Ratio of section height to section width of tire, or..
10.5 = Section width in inches (in)..
R = Construction code..
● "R" means radial construction, or..
● "D" means diagonal or bias construction..
15, 16, 18 = Rim diameter in inches (in)..
Service Description:..
95 = Load Index..
● A numerical code associated with the maximum load a tire can carry..
H = Speed Symbol..
● A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions..
● The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits)..
Load Identification:..
Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire:..
● XL = Extra load (or reinforced) tire, or..
● LL = Light load tire or..
● C, D, E, F, G = Load range associated with the maximum load a tire can carry at a specified pressure..
Maximum Load – Maximum load indicates the maximum load this tire is designed to carry..
Maximum Pressure – Maximum pressure indicates the maximum permissible cold tire inflation pressure for this tire..
Tire Identification Number (TIN)..
The Tire Identification Number (TIN) may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
EXAMPLE:..
DOT MA L9 ABCD 0301..
DOT = Department of Transportation..
● This symbol certifies that the tire is in compliance with the US Department of Transportation tire safety standards and is approved for highway use..
MA = Code representing the tire manufacturing location (two digits)..
L9 = Code representing the tire size (two digits)..
ABCD = Code used by the tire manufacturer (one to four digits)..
03 = Number representing the week in which the tire was manufactured (two digits)..
● 03 means the 3rd week..
01 = Number representing the year in which the tire was manufactured (two digits)..
● 01 means the year 2001..
● Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured. Example: 031 could represent the 3rd week of 1981 or 1991..
Tire Terminology And Definitions..
Term Definition..
B-pillar The vehicle B-pillar is the structural member of the body located behind the front door.
Cold Tire Inflation Pressure..
Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours. Inflation pressure is measured in units of PSI (pounds per square inch) or kPa (kilopascals).
Maximum Inflation Pressure The maximum inflation pressure is the maximum permissible cold tire inflation pressure for this tire. The maximum inflation pressure is molded into the sidewall.
Recommended Cold Tire Inflation Pressure Vehicle manufacturer's recommended cold tire inflation pressure as shown on the tire placard.
Tire Placard A label permanently attached to the vehicle describing the vehicle’s loading capacity, the original equipment tire sizes and the recommended cold tire inflation pressures.
Tire Loading And Tire Pressure..
NOTE:..
The proper cold tire inflation pressure is listed on the driver’s side B-pillar or the rear edge of the driver's side door.
Check the inflation pressure of each tire, including the spare tire (if equipped), at least monthly and inflate to the recommended pressure for your vehicle.
Example Tire Placard Location (Door)..
Example Tire Placard Location (B-pillar)..
Tire And Loading Information Placard..
Tire And Loading Information Placard..
This placard tells you important information about the:..
1. Number of people that can be carried in the vehicle.
2. Total weight your vehicle can carry.
3. Tire size designed for your vehicle.
4. Cold tire inflation pressures for the front, rear, and spare tires.
Loading..
The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire's load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard in..
Vehicle Loading ⇒ page 130.
NOTE:..
Under a maximum loaded vehicle condition, Gross..
Axle Weight Rating (GAWR) for the front and rear axles must not be exceeded.
For further information on GAWR, vehicle loading, and trailer towing ⇒ page 130.
To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on the Tire and Loading..
Information placard. The combined weight of occupants, cargo/luggage and trailer tongue weight (if applicable) should never exceed the weight referenced here.
Steps For Determining Correct Load..
Limit—..
(1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle's placard.
(2) Determine the combined weight of the driver and passengers that will be riding in your vehicle.
(3) Subtract the combined weight of the driver and passengers from XXX kg or..
XXX lbs.
(4) The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “XXX” amount equals 1400 lbs. and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs.
(1400-750 (5×150) = 650 lbs.)..
(5) Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
(6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
Metric Example For Load Limit..
For example, if “XXX” amount equals 635 kg and there will be five 68 kg passengers in your vehicle, the amount of available cargo and luggage load capacity is 295 kg (635-340 (5×68) = 295 kg) as shown in step 4.
NOTE:..
● If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.
The following table shows examples on how to calculate total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations and number and size of occupants.
This table is for illustration purposes only and may not be accurate for the seating and load carry capacity of your vehicle.
● For the following example, the combined weight of occupants and cargo should never exceed..
865 lbs (392 kg).
⚠ WARNING!..
Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them.
TIRES — GENERAL INFORMATION..
Tire Pressure..
Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
Four primary areas are affected by improper tire pressure:..
● Safety..
● Fuel Economy..
● Tread Wear..
● Ride Comfort and Vehicle Stability..
Safety..
⚠ WARNING!..
● Improperly inflated tires are dangerous and can cause collisions.
● Underinflation increases tire flexing and can result in overheating and tire failure.
● Overinflation reduces a tire's ability to cushion shock. Objects on the road and chuckholes can cause damage that result in tire failure.
● Overinflated or underinflated tires can affect vehicle handling and can fail suddenly, resulting in loss of vehicle control.
● Unequal tire pressures can cause steering problems. You could lose control of your vehicle.
● Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left.
● Always drive with each tire inflated to the recommended cold tire inflation pressure.
Both underinflation and overinflation affect the stability of the vehicle and can produce a feeling of sluggish response or over responsiveness in the steering.
NOTE:..
● Unequal tire pressures from side to side may cause erratic and unpredictable steering response.
● Unequal tire pressure from side to side may cause the vehicle to drift left or right.
Fuel Economy..
Underinflated tires will increase tire rolling resistance resulting in higher fuel consumption.
Tread Wear..
Improper cold tire inflation pressures can cause abnormal wear patterns and reduced tread life, resulting in the need for earlier tire replacement.
Ride Comfort And Vehicle Stability..
Proper tire inflation contributes to a comfortable ride. Overinflation produces a jarring and uncomfortable ride.
Tire Inflation Pressures..
The proper cold tire inflation pressure is listed on the driver's side B-pillar or rear edge of the driver's side door.
At least once a month:..
● Check and adjust tire pressure with a good quality pocket-type pressure gauge. Do not make a visual judgment when determining proper inflation. Tires may look properly inflated even when they are underinflated.
● Inspect tires for signs of tire wear or visible damage.
CAUTION!..
After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem.
always “cold tire inflation pressure”. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours. The cold tire inflation pressure must not exceed the maximum inflation pressure molded into the tire sidewall.
Check tire pressures more often if subject to a wide range of outdoor temperatures, as tire pressures vary with temperature changes.
Tire pressures change by approximately 1 psi..
(7 kPa) per 12°F (7°C) of air temperature change.
Keep this in mind when checking tire pressure inside a garage, especially in the Winter.
Example: If garage temperature = 68°F (20°C) and the outside temperature = 32°F (0°C) then the cold tire inflation pressure should be increased by 3 psi (21 kPa), which equals 1 psi (7 kPa) for every 12°F (7°C) for this outside temperature condition.
Tire pressure may increase from 2 to 6 psi..
(13 to 40 kPa) during operation. DO NOT reduce this normal pressure build up or your tire pressure will be too low.
Tire Pressures For High Speed Operation..
The manufacturer advocates driving at safe speeds and within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle operation. Refer to an authorized tire dealer or original equipment vehicle dealer for recommended safe operating speeds, loading and cold tire inflation pressures.
⚠ WARNING!..
High speed driving with your vehicle under maximum load is dangerous. The added strain on your tires could cause them to fail. You could have a serious collision. Do not drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).
Radial Ply Tires..
⚠ WARNING!..
Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly. The instability could cause a collision.
Always use radial ply tires in sets of four. Never combine them with other types of tires.
Tire Repair..
If your tire becomes damaged, it may be repaired if it meets the following criteria:..
● The tire has not been driven on when flat.
● The damage is only on the tread section of your tire (sidewall damage is not repairable).
● The puncture is no greater than a ¼ of an inch..
(6 mm).
Consult an authorized tire dealer for tire repairs and additional information.
Damaged Run Flat tires, or Run Flat tires that have experienced a loss of pressure should be replaced immediately with another Run Flat tire of identical size and service description (Load Index and..
Speed Symbol). Replace the tire pressure sensor as well as it is not designed to be reused.
Run Flat Tires — If Equipped..
Run Flat tires allow you the capability to drive..
50 miles (80 km) at 50 mph (80 km/h) after a rapid loss of inflation pressure. This rapid loss of inflation is referred to as the Run Flat mode. A Run..
Flat mode occurs when the tire inflation pressure is of/or below 14 psi (96 kPa). Once a Run Flat tire reaches the Run Flat mode it has limited driving capabilities and needs to be replaced immediately.
A Run Flat tire is not repairable. When a Run Flat tire is changed after driving with underinflated tire condition, please replace the TPMS sensor as it is not designed to be reused when driven under Run..
Flat mode 14 psi (96 kPa) condition.
NOTE:..
The TPMS Sensor must be replaced after driving the vehicle on a flat tire condition.
It is not recommended to drive a vehicle loaded at full capacity or to tow a trailer while a tire is in the..
Run Flat mode.
For more information ⇒ page 217.
Tire Spinning..
When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle's wheels above 30 mph..
(48 km/h) or for longer than 30 seconds continuously without stopping.
For further information ⇒ page 274.
⚠ WARNING!..
Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. Do not spin your vehicle's wheels faster than 30 mph (48 km/h) for more than 30 seconds continuously when you are stuck, and do not let anyone near a spinning wheel, no matter what the speed.
Tread Wear Indicators..
Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced.
Tire Tread..
1 — Worn Tire..
2 — New Tire..
These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes a 1/16 of an inch (1.6 mm).
When the tread is worn to the tread wear indicators, the tire should be replaced.
For further information ⇒ page 325.
Life Of Tire..
The service life of a tire is dependent upon varying factors including, but not limited to:..
● Driving style.
● Tire pressure – Improper cold tire inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life, resulting in the need for earlier tire replacement.
● Distance driven.
● Performance tires, tires with a speed rating of V or higher, and Summer tires typically have a reduced tread life. Rotation of these tires per the vehicle scheduled maintenance is highly recommended.
⚠ WARNING!..
Tires and the spare tire should be replaced after six years, regardless of the remaining tread.
Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death.
NOTE:..
Wheel valve stem must be replaced as well when installing new tires due to wear and tear in existing tires.
Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline.
Replacement Tires..
The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressures. The manufacturer strongly recommends that you use tires equivalent to the originals in size, quality and performance when replacement is needed ⇒ page 324. Refer to the..
Tire and Loading Information placard or the..
Vehicle Certification Label for the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original equipment tire sidewall.
For more information relating to the Load Index and Speed Symbol of a tire ⇒ page 315.
It is recommended to replace the two front tires or two rear tires as a pair. Replacing just one tire can seriously affect your vehicle’s handling. If you ever replace a wheel, make sure that the wheel’s specifications match those of the original wheels.
It is recommended you contact an authorized tire dealer or original equipment dealer with any questions you may have on tire specifications or capability. Failure to use equivalent replacement tires may adversely affect the safety, handling, and ride of your vehicle.
⚠ WARNING!..
● Do not use a tire, wheel size, load rating, or speed rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death. Use only the tire and wheel sizes with load ratings approved for your vehicle.
● Never use a tire with a smaller load index or capacity, other than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. You could lose control and have a collision.
● Failure to equip your vehicle with tires having adequate speed capability can result in sudden tire failure and loss of vehicle control.
CAUTION!..
Replacing original tires with tires of a different size may result in false speedometer and odometer readings.
TIRE TYPES..
All Season Tires — If Equipped..
All Season tires provide traction for all seasons..
(Spring, Summer, Autumn, and Winter). Traction levels may vary between different all season tires.
All season tires can be identified by the M+S, M&S,..
M/S or MS designation on the tire sidewall. Use all season tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle.
Summer Or Three Season Tires —..
If Equipped..
Summer tires provide traction in both wet and dry conditions, and are not intended to be driven in snow or on ice. If your vehicle is equipped with..
Summer tires, be aware these tires are not designed for Winter or cold driving conditions.
Install Winter tires on your vehicle when ambient temperatures are less than 40°F (5°C) or if roads are covered with ice or snow. For more information, contact an authorized dealer.
Summer tires do not contain the all season designation or “mountain/snowflake” symbol on the tire sidewall. Use Summer tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle.
⚠ WARNING!..
Do not use Summer tires in snow/ice conditions.
You could lose vehicle control, resulting in severe injury or death. Driving too fast for conditions also creates the possibility of loss of vehicle control.
Snow Tires..
Some areas of the country require the use of snow tires during the Winter. Snow tires can be identified by a “mountain/snowflake” symbol on the tire sidewall.
If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle.
Snow tires generally have lower speed ratings than what was originally equipped with your vehicle and should not be operated at sustained speeds over..
75 mph (120 km/h). For speeds above 75 mph..
(120 km/h) refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pressures.
While studded tires improve performance on ice, skid and traction capability on wet or dry surfaces may be poorer than that of non-studded tires.
Some states prohibit studded tires; therefore, local laws should be checked before using these tire types.
SPARE TIRES — IF EQUIPPED..
NOTE:..
For vehicles equipped with Tire Service Kit instead of a spare tire, please refer to “Tire Service Kit” in..
“In Case Of Emergency” for further information.
CAUTION!..
Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with a compact or limited use temporary spare installed. Damage to the vehicle may result.
For restrictions when towing with a spare tire designated for temporary emergency use..
⇒ page 137.
Spare Tire Matching Original Equipped Tire..
And Wheel — If Equipped..
Your vehicle may be equipped with a spare tire and wheel equivalent in look and function to the original equipment tire and wheel found on the front or rear axle of your vehicle. This spare tire may be used in the tire rotation for your vehicle. If your vehicle has this option, refer to an authorized tire dealer for the recommended tire rotation pattern.
Compact Spare Tire — If Equipped..
The compact spare is for temporary emergency use only. You can identify if your vehicle is equipped with a compact spare by looking at the spare tire description on the Tire and Loading..
Information Placard located on the driver’s side door opening or on the sidewall of the tire.
Compact spare tire descriptions begin with the letter “T” or “S” preceding the size designation.
Example: T145/80D18 103M.
T, S = Temporary Spare Tire..
Since this tire has limited tread life, the original equipment tire should be repaired (or replaced) and reinstalled on your vehicle at the first opportunity.
Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare tire. Do not install more than one compact spare tire and wheel on the vehicle at any given time.
⚠ WARNING!..
Compact and collapsible spares are for temporary emergency use only. With these spares, do not drive more than 50 mph..
(80 km/h). Temporary use spares have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnings, which apply to your spare. Failure to do so could result in spare tire failure and loss of vehicle control.
Collapsible Spare Tire — If Equipped..
The collapsible spare is for temporary emergency use only. You can identify if your vehicle is equipped with a collapsible spare by looking at the spare tire description on the Tire and Loading..
Information Placard located on the driver’s side door opening or on the sidewall of the tire.
Collapsible spare tire description example: 165/..
80-17 101P.
Since this tire has limited tread life, the original equipment tire should be repaired (or replaced) and reinstalled on your vehicle at the first opportunity.
Inflate collapsible tire only after the wheel is properly installed to the vehicle. Inflate the collapsible tire using the electric air pump before lowering the vehicle.
Do not install a wheel cover or attempt to mount a conventional tire on the collapsible spare wheel, since the wheel is designed specifically for the collapsible spare tire.
⚠ WARNING!..
Compact and Collapsible spares are for temporary emergency use only. With these spares, do not drive more than 50 mph..
(80 km/h). Temporary use spares have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnings, which apply to your spare. Failure to do so could result in spare tire failure and loss of vehicle control.
Full Size Spare — If Equipped..
The full size spare is for temporary emergency use only. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not. This spare tire may have limited tread life.
When the tread is worn to the tread wear indicators, the temporary use full size spare tire needs to be replaced. Since it is not the same as your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity.
Limited Use Spare — If Equipped..
The limited use spare tire is for temporary emergency use only. This tire is identified by a label located on the limited use spare wheel. This label contains the driving limitations for this spare. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not. Installation of this limited use spare tire affects vehicle handling. Since it is not the same as your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity.
⚠ WARNING!..
Limited use spares are for emergency use only.
Installation of this limited use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limited use spare wheel. Keep inflated to the cold tire inflation pressures listed on your Tire and..
Loading Information Placard located on the driver’s side B-pillar or the rear edge of the driver’s side door. Replace (or repair) the original equipment tire at the first opportunity and reinstall it on your vehicle. Failure to do so could result in loss of vehicle control.
WHEEL AND WHEEL TRIM CARE..
All wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly using mild (neutral Ph) soap and water to maintain their luster and to prevent corrosion.
Wash wheels with the same soap solution recommended for the body of the vehicle and remember to always wash when the surfaces are not hot to the touch.
Your wheels are susceptible to deterioration caused by salt, sodium chloride, magnesium chloride, calcium chloride, etc., and other road chemicals used to melt ice or control dust on dirt roads. Use a soft cloth or sponge and mild soap to wipe away promptly. Do not use harsh chemicals or a stiff brush. They can damage the wheel’s protective coating that helps keep them from corroding and tarnishing.
CAUTION!..
Avoid products or automatic car washes that use acidic solutions or strong alkaline additives or harsh brushes. Many aftermarket wheel cleaners and automatic car washes may damage the wheel's protective finish. Such damage is not covered by the New Vehicle..
Limited Warranty. Only car wash soap, Mopar®..
Wheel Cleaner or equivalent is recommended.
When cleaning extremely dirty wheels including excessive brake dust, care must be taken in the selection of tire and wheel cleaning chemicals and equipment to prevent damage to the wheels.
Mopar® Wheel Treatment or Mopar® Chrome..
Cleaner or their equivalent is recommended or select a non-abrasive, non-acidic cleaner for aluminum or chrome wheels.
CAUTION!..
Do not use scouring pads, steel wool, a bristle brush, metal polishes or oven cleaner. These products may damage the wheel's protective finish.
Such damage is not covered by the New Vehicle..
Limited Warranty. Only car wash soap, Mopar®..
Wheel Cleaner or equivalent is recommended.
NOTE:..
If you intend parking or storing your vehicle for an extended period after cleaning the wheels with wheel cleaner, drive your vehicle and apply the brakes to remove the water droplets from the brake components. This activity will remove the red rust on the brake rotors and prevent vehicle vibration when braking.
Dark Vapor Chrome, Black Satin Chrome, or Low..
Gloss Clear Coat Wheels..
CAUTION!..
If your vehicle is equipped with these specialty wheels, DO NOT USE wheel cleaners, abrasives, or polishing compounds. They will permanently damage this finish and such damage is not covered by the New Vehicle Limited Warranty.
HAND WASH ONLY USING MILD SOAP AND..
WATER WITH A SOFT CLOTH. Used on a regular basis; this is all that is required to maintain this finish.
SNOW TRACTION DEVICES..
Use of traction devices require sufficient tire-to-body clearance. Due to limited clearance, the following snow traction devices are recommended. Follow these recommendations to guard against damage:..
● Snow traction device must be of proper size for the tire, as recommended by the snow traction device manufacturer.
● No other tire sizes are recommended for use with the snow traction device.
● Please follow the table below for the recommended tire size, axle and snow traction device:..
4×2 (2WD)..
Trim Level Axle Tire/Wheel Size..
Snow Traction Device..
(maximum projection beyond tire profile or equivalent)..
Tradesman Rear P265/70R17 S Class..
SLT Rear NONE NONE..
4×4 (4WD)..
Trim Level Axle Tire/Wheel Size..
Snow Traction Device..
(maximum projection beyond tire profile or equivalent)..
Tradesman Rear P265/70R17 S Class..
SLT Rear NONE NONE..
⚠ WARNING!..
Using tires of different size and type (M+S, Snow) between front and rear axles can cause unpredictable handling. You could lose control and have a collision.
CAUTION!..
To avoid damage to your vehicle or tires, observe the following precautions:..
● Because of restricted traction device clearance between tires and other suspension components, it is important that only traction devices in good condition are used. Broken devices can cause serious damage. Stop the vehicle immediately if noise occurs that could indicate device breakage. Remove the damaged parts of the device before further use.
● Install device as tightly as possible and then retighten after driving about ½ mile (0.8 km).
Autosock traction devices do not require retightening.
● Do not exceed 30 mph (48 km/h).
● Drive cautiously and avoid severe turns and large bumps, especially with a loaded vehicle.
● Do not drive for a prolonged period on dry pavement.
● Observe the traction device manufacturer’s instructions on the method of installation, operating speed, and conditions for use.
Always use the suggested operating speed of the device manufacturer’s if it is less than..
30 mph (48 km/h).
● Do not use traction devices on a compact spare tire.
TIRE ROTATION RECOMMENDATIONS..
Tires on the front and rear axles of vehicles operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates.
These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on all season type tires. Rotation will increase tread life, help to maintain mud, snow and wet traction levels and contribute to a smooth, quiet ride.
Refer to the “Maintenance Plan” in this chapter for the proper maintenance intervals. More frequent rotation is permissible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being performed.
The suggested rotation method is the “rearward cross” shown in the following diagram. This rotation pattern does not apply to some directional tires that must not be reversed.
Tire Rotation (Rearward Cross)..