Radiator grille – removal and installation

1. Open the hood.

2. Remove the upper radiator panel. It’s secured by push-pin retainers and plastic riv­ets (see illustration).

12.2 Push-pins and rivets secure the radiator cover

3. Remove the four top grille mounting bolts (see illustration).

12.3 These four screws retain the top of the grille – it’s held by clips at the bottom

RAM Trucks These four screws retain the top of the grille - it's held by clips at the bottom

4. Reach behind the grille and use a small tool to release the clip from each lower inside corner of the grille, then remove the grille.

5. Installation is the reverse of removal.